Il settore ATEX è in grado di fornire supporto normativo ed eseguire prove di laboratorio in conformità alle norme armonizzate per la direttiva 2014/34/UE della serie EN 60079 e EN 80079. Inoltre esegue prove in accordo alla serie di norme IEC 60079 per lo schema IECEx.
La camera ha un volume interno di circa 4 m3 e può ospitare apparecchi di dimensioni fino a 1000 x 1000 x 2000 mm con la possibilità di alimentare le apparecchiature in prova con una tensione fino a 800 V in trifase ed una corrente massima di 100 A. Il sistema di controllo e miscelazione dei gas, è stato progettato per realizzare miscele normative con ossigeno e idrogeno, acetilene, etilene, propano o metano. La correttezza delle miscele è confrontata mediante miscele campione tramite un gascromatografo.
Scopri di più sulle prove ATEX per prodotti in ambienti a rischio esplosione, e sui servizi INTEK fondamentali per assicurare conformità e protezione elevate.
Elenco delle prove disponibili - usa il riquadro "Cerca" per cercare le norme
| Norma di riferimento | Descrizione della prova |
|---|---|
| ISO IEC EN 80079-36 | Apparecchi non elettrici destinati ad essere utilizzati in atmosfere potenzialmente esplosive - Parte 1: metodo di base e requisiti |
| ISO IEC EN 80079-37 | Apparecchi non elettrici destinati ad essere utilizzati in atmosfere potenzialmente esplosive - Parte 2: metodi di protezione |
| IEC 60079-0 ed 6 e 7 EN 60079-0 ed 2007 e 2012(A11) | Resistance to impact |
| IEC 60079-0 ed 6 e 7 EN 60079-0 ed 2007 e 2012(A11) | Drop Test |
| IEC 60079-0 ed 6 e 7 EN 60079-0 ed 2007 e 2012(A11) | Degree of Protection (IP) by enclosure |
| IEC 60079-0 ed 6 e 7 EN 60079-0 ed 2007 e 2012(A11) | Temperature Tests |
| IEC 60079-0 ed 6 e 7 EN 60079-0 ed 2007 e 2012(A11) | Thermal shock test |
| IEC 60079-0 ed 6 e 7 EN 60079-0 ed 2007 e 2012(A11) | Misure di capacità |
| IEC 60079-0 ed 6 e 7 EN 60079-0 ed 2007 e 2012(A11) | Thermal Endurance tests |
| IEC 60079-0 ed 6 e 7 EN 60079-0 ed 2007 e 2012(A11) | Earth continuity |
| IEC 60079-1 ed 6 e 7 EN 60079-1 ed 2007 e 2014 | Explosion tests |
| IEC 60079-1 ed 6 e 7 EN 60079-1 ed 2007 e 2014 | Overpressure tests/sealing tests |
| IEC 60079-7 ed 4 e 5 EN 60079-7 ed 2007 e 2015 | Degree of Protection (IP) by enclosure |
| IEC 60079-7 ed 4 e 5 EN 60079-7 ed 2007 e 2015 | Dielectric strength |
| IEC 60079-7 ed 4 e 5 EN 60079-7 ed 2007 e 2015 | Luminaires – impact and drop tests |
| IEC 60079-7 ed 4 e 5 EN 60079-7 ed 2007 e 2015 | Rectification test |
| IEC 60079-7 ed 4 e 5 EN 60079-7 ed 2007 e 2015 | Inoperative lamp test |
| IEC 60079-7 ed 4 e 5 EN 60079-7 ed 2007 e 2015 | Abnormal operations of ballasts for discharge lamps |
| IEC 60079-7 ed 4 e 5 EN 60079-7 ed 2007 e 2015 | Abnormal operation of luminaires with tubular fluorescent lamps |
| IEC 60079-7 ed 4 e 5 EN 60079-7 ed 2007 e 2015 | Test for wiring of luminaires subject to high-voltage impulses from ignitors |
| IEC 60079-7 ed 4 e 5 EN 60079-7 ed 2007 e 2015 | General purpose connection and junction boxes |
| IEC 60079-7 ed 4 e 5 EN 60079-7 ed 2007 e 2015 | Resistance heating devices and resistance heating units |
| IEC 60079-7 ed 4 e 5 EN 60079-7 ed 2007 e 2015 | Terminal insulating material tests |
| IEC 60079-11 ed 6 EN 60079-11 ed 2012 | Temperature tests |
| IEC 60079-11 ed 6 EN 60079-11 ed 2012 | Dielectric strength tests |
| IEC 60079-11 ed 6 EN 60079-11 ed 2012 | Mechanical tests (§10.6.1) |
| IEC 60079-11 ed 6 EN 60079-11 ed 2012 | Mechanical tests (§10.6.2) |
| IEC 60079-11 ed 6 EN 60079-11 ed 2012 | Cable pull test |
| IEC 60079-15 ed 4 EN 60079-15 ed 2010 | Temperatures |
| IEC 60079-15 ed 4 EN 60079-15 ed 2010 | Minimum degree of protection |
| IEC 60079-15 ed 4 EN 60079-15 ed 2010 | Clearances, creepage distances and separations - Comparative tracking index (CTI) |
| IEC 60079-15 ed 4 e 5 EN 60079-15 ed 2010 | Electric strength |
| IEC 60079-15 ed 4 EN 60079-15 ed 2010 | Supplementary requirements for non-sparking luminaires - Thermal test (normal operation) |
| IEC 60079-15 ed 4 EN 60079-15 ed 2010 | Supplementary requirements for non-sparking luminaires - Thermal test (abnormal conditions) |
| IEC 60079-15 ed 4 EN 60079-15 ed 2010 | Supplementary requirements for non-sparking luminaires - Surface temperatures |
| IEC 60079-15 ed 4 EN 60079-15 ed 2010 | Supplementary requirements for non-sparking luminaires - Resistance to dust and moisture |
| IEC 60079-15 ed 4 EN 60079-15 ed 2010 | Insulation resistance and electric strength |
| IEC 60079-15 ed 4 EN 60079-15 ed 2010 | Thermal endurance to heat |
| IEC 60079-15 ed 4 e 5 EN 60079-15 ed 2010 | Tests for enclosed break devices and non incendive components |
| IEC 60079-15 ed 4 e 5 EN 60079-15 ed 2010 | Tests for sealed devices Conditioning |
| IEC 60079-15 ed 4 e 5 EN 60079-15 ed 2010 | Tests for sealed devices Voltage test |
| IEC 60079-15 ed 4 e 5 EN 60079-15 ed 2010 | Tests for sealed devices Leakeage test on sealed devices (method 1) |
| IEC 60079-15 ed 4 EN 60079-15 ed 2010 | Dielectric withstand test |
| IEC 60079-15 ed 4 EN 60079-15 ed 2010 | Test for sealed devices for luminaries (method A) |
| IEC 60079-15 ed 4 e 5 EN 60079-15 ed 2010 | Type test requirements for restricted-breathing enclosures |
| IEC 60079-15 ed 4 EN 60079-15 ed 2010 | Test for wiring of luminaires subject to high-voltage impulses from ignitors |
| IEC 60079-18 ed 4 EN 60079-18 ed 2009 e 2015 | Tests on the compound - Water absorption test |
| IEC 60079-18 ed 4 EN 60079-18 ed 2009 e 2015 | Tests on the compound - Dielectric strength test |
| IEC 60079-18 ed 4 EN 60079-18 ed 2009 e 2015 | Tests on the apparatus - Maximum temperature |
| IEC 60079-18 ed 4 EN 60079-18 ed 2009 e 2015 | Tests on the apparatus - Thermal endurance test |
| IEC 60079-18 ed 4 EN 60079-18 ed 2009 e 2015 | Tests on the apparatus - Dielectric strength test |
| IEC 60079-18 ed 4 EN 60079-18 ed 2009 e 2015 | Tests on the apparatus - Cable pull tes |
| IEC 60079-18 ed 4 EN 60079-18 ed 2009 e 2015 | Tests on the apparatus - Pressure test for Group I and Group II electrical equipment |
| IEC 60079-18 ed 4 EN 60079-18 ed 2009 e 2015 | Tests on the apparatus - Test for resettable thermal protective device |
| IEC 60079-18 ed 4 EN 60079-18 ed 2009 e 2015 | Tests on the apparatus - Sealing test for built-in protective devices |
| IEC 60079-31 ed 2 EN 60079-31 ed 2014 | Type tests for dust exclusion by enclosures |
| IEC 60079-31 ed 2 EN 60079-31 ed 2014 | Thermal tests |
| IEC 60079-31 ed 2 EN 60079-31 ed 2014 | Pressure test |
| CSA-C22.2 N° 60079-0 | Explosive atmospheres Part 0:Equipment – general use |
| CSA-C22.2 N° 60079-1 | Explosive atmospheres Part 1:Equipment – protection by Flameproof Enclosures “d” |
| CSA-C22.2 N° 60079-15 | Electrical apparatus for Explosive gas Atmospheres – Part 15: Construction, test and marking of type of Protection “n” Electrical apparatus |
| CSA-C22.2 N° 60079-18 | Explosive atmospheres Part 18:Equipment – protection by encapsulation “m” |
| CSA-C22.2 N° 60079-31 | Explosive atmospheres Part 31:Equipment – dust Ignition Protection by Enclosure “t” |
| CSA-C22.2 N° 60079-7 | Explosive atmospheres Part 7:Equipment Protection by increased safety “e” |
| CSA-C22.2 N° 60079-11 | Explosive Atmospheres – Part 11: Equipment protection by intrinsic safety “i” |
| CSA-C22.2 N° 30 | Explosion-proof enclosures for Use in Class I Hazardous Locations |
| ISA-12.12.01/C CSA-C22.2 N° 213 | Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Division 1 and 2 Hazardous (classified) Location |
| UL 674 | Electric Motors and Generators for Use in Division 1 hazardous (Classified) Locations |
| UL 1203 | Explosion-proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Location |
| UL 60079-0 | Explosive Atmosphers – Part 0:Equipment - General Requirements |
| UL 60079-1 | Explosive Atmosphers – Part 1:Equipment protection by Flameproof Enclosures “d” |
| UL60079-11 | Explosive Atmospheres – Part 11: Equipment protected by intrinsic safety “i” |
| UL 60079-15 | Electrical Apparatus for Explosive Gas Atmospheres – Part 15: Construction, Tests and Marking of Type of protection “n” Electrical apparatus |
| UL 60079-18 | Explosive atmospheres – Part 18: Equipment of protection by encapsulation “m” |
| UL 60079-31 | Explosive atmospheres – Part 31: Equipment Dust ignition Protection by Enclosures “t” |
| UL 60079-7 | Explosive atmospheres – Part 7: Equipment Protection by increased safety“e” |
